
Fundamentals of Graphics Communication
6th EditionISBN10: 0073522635
ISBN13: 9780073522630
Copyright: 2011
Instructors: choose ebook for fast access or receive a print copy.
Still Have Questions? Contact your Rep s
With the McGraw Hill eBook, students can access their digital textbook on the web or go offline via the ReadAnywhere app for phones or tablets.
McGraw Hill eBook Courses Include:
- Offline reading – study anytime, anywhere
- One interface for all McGraw Hill eBooks
- Highlighting and note-taking
- Syncs across platforms, always up-to-date
- Available for Android and iOS
Rent Monthly
Purchase Options
Students, we’re committed to providing you with high-value course solutions backed by great service and a team that cares about your success. See tabs below to explore options and pricing. Don't forget, we accept financial aid and scholarship funds in the form of credit or debit cards.
Hardcopy
Receive via shipping:
- Bound book containing the complete text
- Full color
- Hardcover or softcover
ISBN10: 0073522635 | ISBN13: 9780073522630
Purchase
$150.16
The estimated amount of time this product will be on the market is based on a number of factors, including faculty input to instructional design and the prior revision cycle and updates to academic research-which typically results in a revision cycle ranging from every two to four years for this product. Pricing subject to change at any time.
The estimated amount of time this product will be on the market is based on a number of factors, including faculty input to instructional design and the prior revision cycle and updates to academic research-which typically results in a revision cycle ranging from every two to four years for this product. Pricing subject to change at any time.
Program Details
1 Introduction to Graphics Communication
2 Sketching
3 Engineering Geometry
4 Modeling Fundamentals
5 Multiviews and Visualization
6 Auxiliary Views
7 Pictorial Projections
8 Section Views
9 Dimensioning and Tolerancing Practices
10 Geometric Dimensioning and Tolerancing (GDT)
11 Working Drawings and Assemblies
Appendices
Glossary
Index
3 Engineering Geometry
4 Modeling Fundamentals
5 Multiviews and Visualization
6 Auxiliary Views
7 Pictorial Projections
8 Section Views
9 Dimensioning and Tolerancing Practices
10 Geometric Dimensioning and Tolerancing (GDT)
11 Working Drawings and Assemblies
Appendices
Glossary
Index
5 Multiviews and Visualization
6 Auxiliary Views
7 Pictorial Projections
8 Section Views
9 Dimensioning and Tolerancing Practices
10 Geometric Dimensioning and Tolerancing (GDT)
11 Working Drawings and Assemblies
Appendices
Glossary
Index
7 Pictorial Projections
8 Section Views
9 Dimensioning and Tolerancing Practices
10 Geometric Dimensioning and Tolerancing (GDT)
11 Working Drawings and Assemblies
Appendices
Glossary
Index
9 Dimensioning and Tolerancing Practices
10 Geometric Dimensioning and Tolerancing (GDT)
11 Working Drawings and Assemblies
Appendices
Glossary
Index
11 Working Drawings and Assemblies
Appendices
Glossary
Index
Glossary
Index
Index
About the Author
Gary Bertoline
Gary Bertoline is the Associate Vice President for Visualization Computing. He formerly was Department Head and a Professor in the Department of Computer Graphics Technology. He is the co-founder of the Digital Enterprise Center in the School of Technology, and, in the 6 years he served as Department Head, he more than doubled enrollment, funded projects, and donations to the department. Prior to becoming department head he was on the faculty in Computer Graphics Technology for 4 years. Prior to joining the faculty at Purdue, Gary served three years as a faculty member in the College of Engineering and Department of Engineering Graphics at The Ohio State University.
Eric Wiebe
1996 Ph.D., Ergonomics, Dept. of Psychology, North Carolina State University, Raleigh, NC. Dissertation title: Recognition of Local Metric Changes in 3-D Computer Models. 1987 MA, Industrial Design, North Carolina State University, School of Design, Raleigh, NC. Thesis title: The Development of Human-Computer Interface Criteria for the Designer. 1982 BA, Chemistry, Duke University, Durham, NC.
Nathan Hartman
Nathan Hartman is an Associate Professor in the Department of Computer Graphics at Purdue University where he currently teaches undergraduate courses in 3D modeling, graphics standards, and product data management. He has also taught graduate courses covering advanced computer graphics technology topics, research methods, and measurement and evaluation. Nathan is Co-Director of the Purdue University Product Lifecycle Management (PLM) Center of Excellence in the Center for Advanced Manufacturing in Purdue's Discovery Park. His research areas include the use of constraint-based CAD tools within the product lifecycle, the development of strategic knowledge in the use of 3D computer graphics tools, 3D data interoperability and exchange, and the use of virtual reality in PLM environments. Professor Hartman holds a Bachelor of Science in Technical Graphics and a Master of Science in Technology from Purdue University, and a Doctor of Education in Technology Education from North Carolina State University.
William Ross
1 Introduction to Graphics Communication
2 Sketching
3 Engineering Geometry
4 Modeling Fundamentals
5 Multiviews and Visualization
6 Auxiliary Views
7 Pictorial Projections
8 Section Views
9 Dimensioning and Tolerancing Practices
10 Geometric Dimensioning and Tolerancing (GDT)
11 Working Drawings and Assemblies
Appendices
Glossary
Index
3 Engineering Geometry
4 Modeling Fundamentals
5 Multiviews and Visualization
6 Auxiliary Views
7 Pictorial Projections
8 Section Views
9 Dimensioning and Tolerancing Practices
10 Geometric Dimensioning and Tolerancing (GDT)
11 Working Drawings and Assemblies
Appendices
Glossary
Index
5 Multiviews and Visualization
6 Auxiliary Views
7 Pictorial Projections
8 Section Views
9 Dimensioning and Tolerancing Practices
10 Geometric Dimensioning and Tolerancing (GDT)
11 Working Drawings and Assemblies
Appendices
Glossary
Index
7 Pictorial Projections
8 Section Views
9 Dimensioning and Tolerancing Practices
10 Geometric Dimensioning and Tolerancing (GDT)
11 Working Drawings and Assemblies
Appendices
Glossary
Index
9 Dimensioning and Tolerancing Practices
10 Geometric Dimensioning and Tolerancing (GDT)
11 Working Drawings and Assemblies
Appendices
Glossary
Index
11 Working Drawings and Assemblies
Appendices
Glossary
Index
Glossary
Index
Index
About the Author
Gary Bertoline
Gary Bertoline is the Associate Vice President for Visualization Computing. He formerly was Department Head and a Professor in the Department of Computer Graphics Technology. He is the co-founder of the Digital Enterprise Center in the School of Technology, and, in the 6 years he served as Department Head, he more than doubled enrollment, funded projects, and donations to the department. Prior to becoming department head he was on the faculty in Computer Graphics Technology for 4 years. Prior to joining the faculty at Purdue, Gary served three years as a faculty member in the College of Engineering and Department of Engineering Graphics at The Ohio State University.
Eric Wiebe
1996 Ph.D., Ergonomics, Dept. of Psychology, North Carolina State University, Raleigh, NC. Dissertation title: Recognition of Local Metric Changes in 3-D Computer Models. 1987 MA, Industrial Design, North Carolina State University, School of Design, Raleigh, NC. Thesis title: The Development of Human-Computer Interface Criteria for the Designer. 1982 BA, Chemistry, Duke University, Durham, NC.
Nathan Hartman
Nathan Hartman is an Associate Professor in the Department of Computer Graphics at Purdue University where he currently teaches undergraduate courses in 3D modeling, graphics standards, and product data management. He has also taught graduate courses covering advanced computer graphics technology topics, research methods, and measurement and evaluation. Nathan is Co-Director of the Purdue University Product Lifecycle Management (PLM) Center of Excellence in the Center for Advanced Manufacturing in Purdue's Discovery Park. His research areas include the use of constraint-based CAD tools within the product lifecycle, the development of strategic knowledge in the use of 3D computer graphics tools, 3D data interoperability and exchange, and the use of virtual reality in PLM environments. Professor Hartman holds a Bachelor of Science in Technical Graphics and a Master of Science in Technology from Purdue University, and a Doctor of Education in Technology Education from North Carolina State University.
William Ross
Shipping Options
- Standard
- Next day air
- 2nd day air
- 3rd day air
Rent Now
You will be taken to our partner Chegg.com to complete your transaction.
After completing your transaction, you can access your course using the section url supplied by your instructor.